Operating instructions

FENOPLAST repair kit

Applied to dry, clean and degreased surface profile. Has properties that approximate to PVC, is plastoelastichnym and contains antioxidant Sorbex.

Mixing ratio:

1. Small scratches - 1 part by weight of the liquid and powder 2 parts by weight.

2. Holes (erroneous drilling small fault locations) - 1 part by weight of the liquid and powder 3-4 parts by weight.

Solidification of the material within 5-10 minutes at room temperature.

3. Longer processing large pouring property - 1 part by weight of the powder and 1 part by weight of liquid.

Live cables and metal NOT CUT!

Scissors for cutting at an angle of 90 degrees, type V and ancillary works, weight 400 g

Handles insulation and seaming roll to seal.

All locks duplicative and opened one key.

A - 60

B - 34.5

C - 37

D - 9

E - 44

Delivery time up to 2 weeks.

Contact one-component adhesive FENOBOND 600811, 615 g (FENOPLAST, Germany)

Glue for gluing a wide variety of materials: leather, fleece, felt, textiles, veneer, metals, wood, absorbent substrates, rubber, polyurethane foams, insulating materials and plastics. High strength. Not suitable for bonding Styropor® foams and soft PVC.

FENOSOL® Stainless-Steel-Cleaner – For cleaning and protecting of stainless steel surfaces.

FENOSOL® Stainless-Steel-Cleaner is a high-quality product for cleaning of stainless steel surfaces both indoors and outdoors.

The cleaner removes fingerprints, lubrication-films and contaminations of all kinds quickly and effortlessly without damaging the surface.

The new KVS5500 saw is equipped with a brushless motor and 2 powerful lithium batteries, double safety switch, 1/4 inch chain with protective cover, ergonomic handle with protection.

This saw model is the smallest in the line, but at the same time the most practical to use. The oil tank is built-in, the chain lubrication is independent, and the oil level is always visible from the outside.

Includes 2 lithium batteries with a voltage of 14.4 V and a capacity of 4.0 Ah. Comes with triple charger, repair kit, case for storage and safe transport. An extremely practical and compact saw.

The kit includes two batteries.

Blade 5021 for LÖWE 5.124, 5.127

200002 FENOSOL PVC yellowing remover FENOPLAST, set

The kit consists of two products and provides a quick and effective two-step restoration of white PVC surfaces.

Video: https://www.fenoplast.de/fileadmin/user_upload/FENOSOL_PVC-Vergilbungsentferner.mp4

Roto AS800-009-60 729-728 011

U-shaped, LEFT

247xU24x6 mm

High-quality suction cup in a case with a pump made of durable aluminum with a special suction disk (d 220 mm) for curved and embossed surfaces.

Strong pruning shears with special PTFE-coated blade. The PTFE coating facilitates the sliding of the blade during cutting, in addition to prevent rust and to facilitate cleaning operations. The handle is carefully designed for maximum ergonomy. Finally, the cut made even softer thanks to the hidden rubber bumper.

Scissors with the function of cutting thin packaging wire.

Type BYPASS, weight 830g, length 800mm.

Cutting diameter up to 35mm.

Protective leather case for blades (short) Original LÖWE 9808.

Live cables and metal NOT CUT!

Scissors for cutting at an angle of 90 degrees, and ancillary works, the weight of 395 g

KANTEN FIX 2178007 Nussbaum

Felt-tip pen with acrylic-based “covering” paint.

Forged steel scissors for cutting leather, hides and soft plastics, etc.

Length 22 cm

Thick pyramid blades for precise cutting of high-strength materials.